Dialysis water supply
Comprehensive water treatment systems for dialysis units
- Comprehensive range of reverse osmosis systems
- Individualized water treatment systems
- High standard of water purification for dialysis
- AquaA, AquaBplus, AquaC
DISCLAIMER
Not all products and services are cleared or available for sale in all EU countries. Check your country web site for details.
Dialysis water supply at a glance
In order to ensure the required quality of fluids, our product range includes a variety of systems for different purification stages, such as reverse osmosis systems. The right system can be assembled based on personal preferences and local requirements.
AquaA Product Group
Our innovation meets your evolving needs
AquaA
AquaA is the advanced system for permeate preparation in dialysis center and provides a permeate capacity up to 4,000 l/h.
Advantages of the AquaA:
- Integrated sample ports for quality assurance procedures
- Integrated control system before and during dialysis operation
- Energy and water saving operation
- Remote control
- Emergency operation
- Prepared for integration into dialysis and hospital IT management systems
AquaA2
AquaA2 is an additional (2nd stage) reverse osmosis module for the AquaA designed to meet higher permeate quality of a modern dialysis center.
Advantages of the AquaA2:
- Full redundancy
- Higher permeate quality
- In case of emergency can be operated as a stand-alone unit
AquaHT
AquaHT is a hot water disinfection module designed to be integrated into the AquaA product group. It enables the heat disinfection of the both modules AquaA and AquaA2.
Advantages of the AquaHT:
- Integrated heat disinfection of up to 40 HD machines in parallel
- Heat disinfection is performed automatically and is documented by the system as specified by ISO 26722:2009
- AquaHT permits continuous disinfection: a thermal disinfection of the permeate ring can be followed by a subsequent disinfection of the RO membranes
AquaUF
AquaUF is an ultrafiltration module for higher permeate quality.
Advantages of the AquaUF:
- Increased permeate quality
- Removal of micro-organisms, bacteria and viruses
- Heat disinfection of ultrafiltration module
- Bypass possibility
- High chemical resistance, double-layered
AquaBplus Product Group
The right fit for your budget
AquaBplus
AquaBplus is a basic module for permeate preparation in the dialysis center.
Advantages of the AquaBplus:
- Sensors and hydraulic systems are controlled by integrated functional test routines
- User-friendly interface
- Upgradable by a range of options
- Network connectivity
AquaBplus B2
AquaBplus B2 is the second stage of AquaBplus product group. It is designed to meet the needs and quality standards of a modern dialysis center.
Advantages of the AquaBplus B2:
- Both stages can be operated together or individually (for redundancy or higher permeate quality)
AquaBplus HF
AquaBplus HF allows hot disinfection of the permeate loop, dialysis unit tubing and the dialysis units itself.
Advantages of the AquaBplus HF:
- Sequential disinfection of up to five HD machines
- Can be retrofitted
- Reduction of biofilm formation by permeate ring and connected user points without additional chemical disinfection
- Continuous monitoring of temperature
AquaC Product Group
When independence matters
AquaC UNO H
AquaC UNO H provides a thermal disinfectable single patient RO.
Advantages of the AquaC UNO H:
- Significant risk reduction by using hot water instead chemicals for disinfection
- Heat disinfection of the membrane and the ring
- Interface heat disinfection in combination with FME HD device 5008/5008S Cordiax
- Automated data logging and monitoring
- Network connection
- Start / Stop communication with HD-device
- Low noise emissions
- Ring main length up to 10 m
AquaUNO
AquaUNO is a mobile single patient reverse osmosis model.
Advantages of the AquaUNO:
- Automatic rinse cycles
- Monitoring of cleaning cycles
- Start / stop communication with HD-device
- Low noise emissions
High flexibility – Optional porters for AquaC UNO H and AquaUNO
AquaWTU
AquaWTU is a complete reverse osmosis water treatment system designed to supply up to 5 dialysis machines. The complete system is housed and comprises pre-treatment and reverse osmosis.
Advantages of the AquaWTU:
- Production of dialysis permeate from drinking water
- Automatic rinse cycles
- Programmable start / stop function
- User-friendly interfaceIntegrated pre-filtration including softener
